None

This happened again when I selected a portrait (specifically #10). When I load the save, it reverts, but it does break the current play.

Description: I moved around with soldiers on different levels, not at the same time. I also might have moved different soldiers around at the same time. To be honest, I am not sure of either and don't believe either to be related to the observation. groundcombat-1.json groundcombat-2.json groundcombat-3.json groundcombat-4.json groundcombat-5.json groundcombat-6.json groundcombat-7.json groundcombat-8.json groundcombat-9.json strategy-3.json user-1.json output.log

Description: On the first ground mission, building walls were see-through. What Happened: Started first ground combat and the buildings were partially see-though. This is likely partially related to a bug with the "see through" feature added in 9.0 - a great addition I might add.

Given a new game was started When you navigate to the Engineering screen Then Plasma Rifle artwork/project is in the project selected area But the project cannot be started. Please note, I made the mistake of not getting a screenshot.

Yeah, I also have had some issues with this particular map, including the one you listed, as well as some additional ones. I think they are on it.

Yeah, I saw afterwards that my assumption was unfounded. Thanks!

Not sure if this is just placeholder art, but when the gundrone is shot down there is no difference between the "living" gun drone and the "dead" gun drone. In addition, when placing a xenonaut over the wreckage and checking the inventory of the fallen gun drone, the image of the gun drone is a pink unarmored xenonaut, not a gun drone. I don't like recording these types of bugs at this point in the build, especially seeing that there is a UI overhaul in v9.0 according to another bug report, but figured I'd mark it down.

After completing a base mission, I commenced a second without returning the Skyhawk to a base. On the start of a second mission, all soldiers who had a converted plasma rifle did not have any ammunition in their inventory and therefore could not use the weapon. Speculation: I love and hate speculating, but from the save groundcombat-154, there are four xenonauts declared inside a ComponentAlias block. In this block, seen below, two are male, two are female, and in the ground combat mission, there are two male and two female xenonauts with converted plasma rifles equipped exhibiting the above bug. Other units declared in this block are NPC aliens and NPC humans. My guess is that somewhere along the way, the assignment of the weapon after the first mission is changing/overriding a property in the xenonauts entities that have converted plasma rifles equipped. "ComponentAliases":[ {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/xenonaut/combat^default^male.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/xenonaut/combat^default^female.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/xenonaut/nanothread^default^male.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/xenonaut/nanothread^default^female.prefab","addColliders":false,"dontInstantiate":false,"pool":false},{"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/drone/default/gundrone^default^default.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/wraith/default/small_light^default^default.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/andron/default/guard^default^default.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/wraith/default/small_noarmor^default^default.prefab","addColliders":false,"dontInstantiate":false,"pool":false},{"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/wraith/default/small_light_helmet^default^default.prefab","addColliders":false,"dontInstantiate":false,"pool":false},{"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/local_forces/default^boreal^default.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/civilian/default^boreal^female.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-actor/combatant/human/civilian/default^boreal^male.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-sfx/death/wraith.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"xenonauts-:-Xenonauts.GameScreens.GroundCombat-::-sfx/death/drone.prefab","addColliders":false,"dontInstantiate":false,"pool":false}, {"value":"Xenonauts.GameScreens.GroundCombat-::-ui/item_container","addColliders":false,"dontInstantiate":false,"pool":false}] groundcombat-152.json groundcombat-153.json groundcombat-154.json strategy-44.json strategy-45.json output.log output.log_1.e18db1ce23a70cf6dc36a29860ea8314

When in the Engineering tab/menu, when adding runs to a converted alien weapon, the stock count is off by one. To put this another way, two converted plasma pistols can be ordered when there is only one available in storage.

When in the armory, the color of female characters' clothing toggles from blue to brown when they are equipped with the nanothread armor.

While int he SOLDIERS tab/menu, when I click on the column header STATUS, sorting does not occur as expected. Instead of sorting alpha-numerically when selecting STATUS, it is sorting by the order in which soldiers were recruited according to the save game. Skyhawk-1 ... Skyhawk-1 Skyhawk-2 ... Skyhawk-2 Unassigned ... Unassigned What happens is that there is no obvious rhyme or reason to the sorting method. I did not find any evidence of the sort attempt in the logs or save files, so I can't say for sure if it is sorting by resource number or not. groundcombat-1.json

I captured two Psyon soldiers in a mission. Upon the Skyhawk returning to base, the informational page about Psyon soldiers popped up. After I closed the first one, another one popped up with the same information. EDIT: Both Psyons captured were Psyon soldiers (i.e. not engineer Psyons, Psyons, etc.). END EDIT From the logs: 2019-10-26 22:23:45,600 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Common\Code\Concepts\FSM\FSMSystem.cs:272) StrategyUISystem Entering: ResearchProjectComplete, with the following parameters: Strategy.UI.Elements.ResearchProjectCompleteElement+Parameters, ResearchProjectComplete, Xenonauts.Strategy.Systems.StrategyUISystem+ShowModalParameters 2019-10-26 22:23:45,602 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Artitas\Artitas.Core\Code\World.cs:702) Handled StateEnterReport<global::Xenonauts.Strategy.Systems.StrategyUIStates, global::Xenonauts.Strategy.Systems.StrategyUITriggers>: Enter State: source:GeoscapeMain with trigger:ShowModal destination:ResearchProjectComplete ... 2019-10-26 22:24:21,737 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Artitas\Artitas.Core\Code\World.cs:702) Handled StateExitReport<global::Xenonauts.Strategy.Systems.StrategyUIStates, global::Xenonauts.Strategy.Systems.StrategyUITriggers>: Exit State: source:ResearchProjectComplete with trigger:Hide destination:Modal 2019-10-26 22:24:21,740 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Artitas\Artitas.Core\Code\World.cs:702) Handled global::Xenonauts.Strategy.Systems.TimeControlCommand: Xenonauts.Strategy.Systems.TimeControlCommand 2019-10-26 22:24:21,742 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Common\Code\Concepts\FSM\FSMSystem.cs:272) StrategyUISystem Entering: ResearchProjectComplete, with the following parameters: Strategy.UI.Elements.ResearchProjectCompleteElement+Parameters, ResearchProjectComplete, Xenonauts.Strategy.Systems.StrategyUISystem+ShowModalParameters 2019-10-26 22:24:21,744 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Artitas\Artitas.Core\Code\World.cs:702) Handled StateEnterReport<global::Xenonauts.Strategy.Systems.StrategyUIStates, global::Xenonauts.Strategy.Systems.StrategyUITriggers>: Enter State: source:Modal with trigger:ShowModal destination:ResearchProjectComplete ... 2019-10-26 22:24:28,591 [INFO] (D:\Jenkins\workspace\X2 (Build)\hotfix-0.52.3\Assets\Code\Libraries\Artitas\Artitas.Core\Code\World.cs:702) Handled StateExitReport<global::Xenonauts.Strategy.Systems.StrategyUIStates, global::Xenonauts.Strategy.Systems.StrategyUITriggers>: Exit State: source:ResearchProjectComplete with trigger:Hide destination:Modal output.log groundcombat-123.json strategy-36.json

I repeated the steps in build 8.3. There was no issue starting a mission with the above criteria on this build. I'm attaching the save on the start of the second misison and the logs in case those are desired. user-2.json output.log output.log_1.a3f5ce3302cb0b5f0c19533039e85695 groundcombat-53.json groundcombat-54.json

Description: I was playing a ground mission, ended my turn, and the game never returns control to the player. What Happened: On a ground mission, I end my turn, and the normal alien / ally turn starts, but control never returns to the player. Other times, the Alien Turn never ends. This only happens on a particular map where the osprey version of the Skyhawk is used and it is an Alien Cache, not an actual Alien Base, and not a crash site. output.log groundcombat-558.json strategy-134.json

Game is crashing after the mission loads. What Happened: I had completed a Alien Base mission and then immediately flew the Skyhawk to a UFO crash site and commenced the mission. The map loads but crashes soon after. Artitas.EntityMutationException: A crash occurred during entity mutation - Mutation [ID: 31, ComponentID: 40, Next: Common.Components.FieldOfViewComponent, Added: True] ---> System.NullReferenceException: A fatal error occurred during Update[] - - Object reference not set to an instance of an object at Xenonauts.GroundCombat.SightSystem.<OnInitialize>m__4 (Xenonauts.GroundCombat.Components.LifeStatusComponent status) [0x00000] in <filename unknown>:0 My guess is that because I lost someone in combat from the previous mission, the LifeStatusComponent is being set to null/0, and that a check is not being made as to the health status of soldiers that properly handles the case of LifeStatus:Dead. Anywho, good luck and hope this helps! So Istvan Doczi may very well be the culprit (KIA from previous mission) Just before the crash, he has no life status and was the one that died on the previous mission. On Skyhawk: GlobalEntity 354 - Soldier [Name:Istvan Doczi - Rank:corporal] LifeStatus:Dead Just before crash: Team:human Player:xenonauts Actor: ID:14 HP:68|68 ControllerLink( To: Player: ID:13, Name:xenonauts, TeamLink( To: Team: ID:11, Name:human)) Addr:[X:10, Y:0, Z:49] Name:Lea Bertrand Body:human_xenonaut Rank:sergeantmajor LifeStatus:Conscious - , Items: Primary: 24 - Ballistic Sniper. Secondary: 26 - Ballistic Sub-Machine Gun. Actor: ID:31 HP:0|25 ControllerLink( To: Player: ID:13, Name:xenonauts, TeamLink( To: Team: ID:11, Name:human)) Addr:[X:9, Y:0, Z:49] Name:Istvan Doczi Body:human_xenonaut Rank:corporal - , Items: Primary: 40 - Ballistic Rifle. Secondary: 41 - Medikit. groundcombat-100.json strategy-27.json strategy-28.json output.log

Just to add to this, I changed the soldiers assigned to different Skyawks (i.e. from Skyhawk 1 to Skyhawk 2) all of my soldiers lost their loadouts. In addition, some had their armor unassigned or swapped. I re-formatted for clarity (I hope) Background Given I have two skyhawks when i switch which skyhawk a soldier is assigned to then the portrait of that soldier becomes incomplete and their loadout is no longer editable. Scenario Given I change a soldier's state to unassigned Then their portrait returns and equipment is the default loadout Scenario Given I recruit soldiers When they are pending arrival Then all their portraits are also lobbed off as seen above. Scenario Given I update a soldier's loadout When I view other soldiers with the same named loadout Then they are placed into the same state as the background no matter where they are assigned.

Yeah, it has happened a few times that load-outs doesn't load and when that happens the ground missions won't start. When resetting a soldier that has this issue, the gear that soldier had is deleted, not put back into a player's supplies. Might be linked to swapping which Skyhawk a soldier is assigned to in the SOLDIERS tab or related to other errors from a particular mission. I logged another bug where a particular mission has an endless Alien Turn, and this bug happened after both times I completed the same map on two separate occasions during the same play-through. The save file I attached 'should' have an example of a soldier's load-out not loading. iron_man-581.json

The game is definitely freezing up on me randomly on only that map. It has happened on two different occasions on that particular map. From what I observe, when an endless alien turn occurs, if I quit, reload, and change the direction a soldier faces, a red log blip flashes on the screen, I end my turn, and will eventually get control again. This is just me recording my observations and I have a strong feeling I am just giving red herrings with this description, but it has happened only on this map, and on two separate occasions.

Looks like not all soldiers in the Armory view were loaded properly. After re-fitting soldiers, their portraits loaded properly, and I was able to launch the mission.

Description: I click COMMENCE MISSION on an Alien Base and the game crashes What Happened: I sent out a skyhawk and waited. Once the mission screen popped up I clicked COMMENCE MISSION and the game crashed (tried multiple times on the same save). Please let me know if Gherkin is ok.iron_man-458.jsoniron_man-458.jsoniron_man-458.jsoniron_man-458.jsoniron_man-458.json Background: Given an alien ship is shot down over an Alien Base Scenario Given the Destination Reached box is open When I click COMMENCE MISSION Then the game crashes Scenario Given the Destination Reached box is open When I click ABANDON MISSION Then the dialog box closes And the Skyhawk returns to base. Further information: Destroyed a large alien ship over an Alien Base Send a party to the Alien Base Click COMMENCE MISSIONiron_man-458.json iron_man-458.json

Description: I was playing a ground mission, ended my turn, and the game never returns control to the player. What Happened: On a ground mission, I end my turn, and the normal alien / ally turn starts, but control never returns to the player. Further information: End the turn Control never returns to the player output_log.txt iron_man-388.json

I can confirm that this is happening for me in version 8. On GOG, I was playing 7.x last week and today with the update to version 8, my troops do not level up after missions and are all still private. EDIT: After about the fourth mission, ranking started to work again. EDIT 2: Soldiers increase rank in mission screen but the rank change is not persisted (i.e. after getting promoted the soldiers are again demoted to private).