Moonfire Posted December 3, 2012 Share Posted December 3, 2012 I've noticed that some statistics are given in imperial measures and others in metric. It would really help to have them all be the same system. My preference would be metric. Quote Link to comment Share on other sites More sharing options...
raziel1981 Posted December 3, 2012 Share Posted December 3, 2012 +1 metric Quote Link to comment Share on other sites More sharing options...
radister Posted December 3, 2012 Share Posted December 3, 2012 (edited) It’s probably because we British use both imperial and metric here. So it’s not that strange to see both types as we are used to seeing it. For example we would use metric cm and meters for small measurements but we use miles for large distance. in fact if you told someone here something was 5km away, you probably be asked how far was that in miles. yet if you told someone something was 14 inches, you be asked how many cm that was. We are a strange nation. Edited December 3, 2012 by radister Quote Link to comment Share on other sites More sharing options...
HWP Posted December 3, 2012 Share Posted December 3, 2012 I'm in favor of using a chain-dalton-jiffy system. It would be very convenient and highly familiar under some circumstances. Quote Link to comment Share on other sites More sharing options...
radister Posted December 3, 2012 Share Posted December 3, 2012 Although it hindsight i can see the Chain-Dalton-Jiffy system doesn't exisit, it still didn't stop me from trying too look it up in google for the slim chance it was real. sadly i was disappointed with the results. Quote Link to comment Share on other sites More sharing options...
tass Posted December 3, 2012 Share Posted December 3, 2012 I'd go with metric.. most military and scientific organizations use metric as the standard. Quote Link to comment Share on other sites More sharing options...
MrPyro Posted December 3, 2012 Share Posted December 3, 2012 The chain is actually a measurement of distance, although for the life of me I cannot remember how far it is (and using Google would be cheating). 22 feet, maybe? Same length as the wicket area in cricket? And then you get rods and furlongs and my brain starts dripping from my ears. Quote Link to comment Share on other sites More sharing options...
HWP Posted December 3, 2012 Share Posted December 3, 2012 Although it hindsight i can see the Chain-Dalton-Jiffy system doesn't exisit, it still didn't stop me from trying too look it up in google for the slim chance it was real. It did not exist before that post was written. But all you need for a system are three units, the rest falls into place automatically in kg-m-s pattern. So it exists now, we just need to name some units after the devs. Speed is chains per jiffy, radioactivity is inverse jiffies, gravitation is cubic chains per dalton per square jiffy. Quote Link to comment Share on other sites More sharing options...
Gazz Posted December 4, 2012 Share Posted December 4, 2012 in fact if you told someone here something was 5km away, you probably be asked how far was that in miles. That's easy to answer. It's just as far. And yes, the british are strange. They have 2 metric feet. As far as the game goes, I don't really care. In the game all distances / ranges / speeds are pretty much made-up numbers that will be adjusted during game balancing. =) Quote Link to comment Share on other sites More sharing options...
GoodGuyEddy Posted December 4, 2012 Share Posted December 4, 2012 I'm in favor of using a chain-dalton-jiffy system The secret council of people who rule the world from poorly lit rooms dissaproves of this. Quote Link to comment Share on other sites More sharing options...
FranTorres Posted December 5, 2012 Share Posted December 5, 2012 +1 Metric Quote Link to comment Share on other sites More sharing options...
Chris Posted December 5, 2012 Share Posted December 5, 2012 Nah, I just freestyle it based on which side of the bed I get up on. Quote Link to comment Share on other sites More sharing options...
Gorlom Posted December 5, 2012 Share Posted December 5, 2012 Have you considered putting your bed by a wall so that you have to get up on the same side every morning? Quote Link to comment Share on other sites More sharing options...
erutan Posted December 5, 2012 Share Posted December 5, 2012 I know Canada uses metric for almost everything, but cooking recipes are still often in Imperial units. So a mix isn't unrealistic. I think just using metric makes it feel more "international" though. Quote Link to comment Share on other sites More sharing options...
Gazz Posted December 6, 2012 Share Posted December 6, 2012 Have you considered putting your bed by a wall so that you have to get up on the same side every morning? Why would you use artificial barriers to limit a developer's creativity? Quote Link to comment Share on other sites More sharing options...
icepick37 Posted December 6, 2012 Share Posted December 6, 2012 Limits are good for creativity. Quote Link to comment Share on other sites More sharing options...
Gazz Posted December 6, 2012 Share Posted December 6, 2012 Nah, just for design. Quote Link to comment Share on other sites More sharing options...
GoodGuyEddy Posted December 6, 2012 Share Posted December 6, 2012 Why not measure it with puns? Quote Link to comment Share on other sites More sharing options...
IceVamp Posted December 8, 2012 Share Posted December 8, 2012 Metric is what puts chaos in order as far as I'm concerned. Go metric! Quote Link to comment Share on other sites More sharing options...
Buzzles Posted December 11, 2012 Share Posted December 11, 2012 Personally, I favour the RockPaperShotgun/PCGamer method of measuring things in Peggles. However, as I'm British and currently working in a shop that sells china/stonewear and furniture amongst other things, I will happily accept concurrent use of both metric and Imperial as I often end up flitting between the two during single a single conversation with customers. It's also quite suprising just how particular some people can be about the size of their dinner plates. Quote Link to comment Share on other sites More sharing options...
JustasJ Posted December 13, 2012 Share Posted December 13, 2012 Were you counting something, metric would make more sense, since centimeter-to-meter-to-kilometer conversion is easier than inch-to-foot-to-yard-to-mile one. Since no calculation with those is done, it makes no difference. Quote Link to comment Share on other sites More sharing options...
winterwolves Posted December 13, 2012 Share Posted December 13, 2012 The mix and match is totally realistic. I'm in NZ here, where everything is metric. Except if you ask someone their height, the will say it in feet. Anyway, on aircraft that I work on there is a mix everywhere. My current helicopter is all imperial airframe, but metric engine. A jet I used to work on was metric airframe, imperial engine, with some british-whitworth stuff thrown in on pipelines. This is mostly spanner sizes I am talking here, but the point is that different systems get used by the one organisation all the time. Quote Link to comment Share on other sites More sharing options...
Bofferbrauer Posted December 16, 2012 Share Posted December 16, 2012 It’s probably because we British use both imperial and metric here. So it’s not that strange to see both types as we are used to seeing it. For example we would use metric cm and meters for small measurements but we use miles for large distance. in fact if you told someone here something was 5km away, you probably be asked how far was that in miles. yet if you told someone something was 14 inches, you be asked how many cm that was.We are a strange nation. Since the game is based on (Pseudo-)Science, and Scientists use metric systems (it's even based on the metric System), so I suggest using the metric system. however, for people not used to the metric system, there might be some need for a possibility to change between metric and imperial systems Quote Link to comment Share on other sites More sharing options...
Swe_Racoon Posted December 25, 2012 Share Posted December 25, 2012 The imperial system always made me scratch my head, despite making use of it from time to time when I play miniature games. I say metric all the way! Quote Link to comment Share on other sites More sharing options...
thothkins Posted December 26, 2012 Share Posted December 26, 2012 I'm imperial for some measurements but not others, depending on the subject/ who I'm talking to.* Temperature is Fahrenheit for hot weather but Celsius for cold. Currency varies depending on which country or how I'm haggling. Heights and weights also change system depending on circumstances. Anything health related will be metric. Anything DIY won;t be. Cooking switches effortlessly between both systems every two minutes, with the added measurement system of teaspoons, tablespoons, and dollops. *works pretty well, if you ignore that space telescope plummeting from the skies due to a slight misunderstanding. Don't look up, just ignore it please. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.